Installation Manual

Table Of Contents

120 20110-141 iv Gemini

Installation Guide

• Power output specifications for 800MHz model added to section 1.2.1

“Features”.

• Main transceiver Output Power for 800MHz model added to:

Table 4 “Tests, Full and Half Channel Units” and minimum value ed-

ited in the footnote.

• Title of section 4.4.4.2 edited to specify that RSSI Indicator also

serves as power meter. Note added to establish that the internal

wattmeter is not to be interpreted as a precision instrument.

• Section 4.4.4.3.1 “Unmodulated Carrier” edited to show 800MHz model

power check nominal forward wattage.

• Section 2.4.2 “Routing of Power Cable”, step no. 7, clarification of

negative wire connection.

Version 1.20, June 2000:

• LED indication explanation for the 800MHz (2% duty cycle limit)

model added as a footnote to table 1 and to section 5.3 GPS Test.

• Section 2.5 “Antenna” rewritten and now including more details con-

cerning “Planning” and has a new antenna spacing drawing.

• More details added to section 4.2 concerning starting of the WinRIS

program from MS-Windows.

• Environmental MIL spec added

• FCC Certification number added to Specifications section.

Version 1.10, March 2000:

Addition of 800MHz specifications, revision to paragraph 2.2.1 - RF

Radiation Warning and to paragraphs 2.5 through 2.5.3. – Antenna in-

stallation.

Version 1.0, January 2000:

First released version