Installation Guide

120 20110-142
iv
Gemini
PD
Installation Guide
• Introduction of 25.6 Kbps model. Relevant changes made to:
- Section 1.2.1 “Features”
- Table 3 “Carrier Modulation"
- Table 4 “Tests, Full & Half Channel Units”
- Section 6 “Specifications”.
- Emission designators table added to Section 6 “Specifications”.
Version 1.30, August 2000
• Power output specifications for 800MHz model added to section 1.2.1
“Features”.
• Main transceiver Output Power for 800MHz model added to:
Table 4 “Tests, Full and Half Channel Units” and minimum value edited
in the footnote.
• Title of section 4.4.4.2 edited to specify that RSSI Indicator also
serves as power meter. Note added to establish that the internal
wattmeter is not to be interpreted as a precision instrument.
• Section 4.4.4.3.1 “Unmodulated Carrier” edited to show 800MHz model
power check nominal forward wattage.
• Section 2.4.2 “Routing of Power Cable”, step no. 7, clarification of
negative wire connection.
Version 1.20, June 2000:
• LED indication explanation for the 800MHz (2% duty cycle limit) model
added as a footnote to table 1 and to section 5.3 GPS Test.
• Section 2.5 “Antenna” rewritten and now including more details con-
cerning “Planning” and has a new antenna spacing drawing.
• More details added to section 4.2 concerning starting of the WinRIS
program from MS-Windows.
• Environmental MIL spec added
• FCC Certification number added to Specifications section.
Version 1.10, March 2000:
Addition of 800MHz specifications, revision to paragraph 2.2.1 - RF Ra-
diation Warning and to paragraphs 2.5 through 2.5.3. – Antenna installa-
tion.
Version 1.0, January 2000:
First released version