User's Manual

001-2019-500 Rev 0

Paragon4 – UHF, 700 & 800MHz User Manual

6.8.6 Setup (Advanced) ► IP Optimization

Figure 49 - Setup (Advanced)-Optimized IP Settings

Item

Description

RF ACK

Disabled (Default) - TCP packets are always RF acknowledged regard-

less of this option setting.

Enabled - Use when packets need to be acknowledged at the RF level

by the remote unit (destination unit). This option is applicable to all

packet types other than TCP.

OIP Retries

Number of OIP retries. Default = 2