User's Manual

001-2019-500 Rev 0

Paragon4 – UHF, 700 & 800MHz User Manual

The following setup example would allow the “Sender” unit to communicate with different multicast

groups. The settings shown in Figure 47 below, and also represented in

Figure 48, would enable the Sender unit to reach all entities of the various groups.

Figure 47 - Multicast Window Details (On the Base station)

Multicast (Enabled/Disabled)

Enables or disables the registration of the multicast groups by the Base

Mobile address

Indicates the “All Mobile” multicast group

Multicast Address List

Indicates the various “Mobile Host” groups

Figure 48 - Typical E-DBA Multicast Groups (with addresses)

Sender

Network

“All Mobile” group

(224.168.201.1)

Base (P4)

RF Airlinks

Mobile Host

“Mobile Host” group 1

(224.168.200.1)

“Mobile Host” group 2

(224.168.200.2)

Mobile (G3)