User's Manual

001-2019-500 Rev 0
Paragon4 – UHF, 700 & 800MHz User Manual
35
6.8.2 Setup (Advanced) ► RF (IP)
At the time of manufacture, each Paragon4 base station and GeminiG3 radio modem is provided with a
unique MAC address for its Ethernet and RF interfaces. These addresses cannot be changed. The RF in-
terface is also provided with a unique Factory RF IP address. If this IP address conflicts with any existing
IP network, it can be overridden.
Figure 24 - Advanced IP Configuration - RF (IP)
Item
Description
RF MAC
RF Interface MAC address in HEX format (factory-set).
RF IP Address
Displays factory-assigned address: nnn.nnn.nnn.nnn “Factory”
Entering 0.0.0.0 sets the RF IP Address to the factory default and highlights the
“Factory” name (active address)
Entering nnn.nnn.nnn.nnn (RF IP Address of your choice) overrides the factory
default and highlights the “Override” name (active address)
RF Net Mask
Set to valid common IP netmask for all units within a Paragon4 network
RF MTU
RF Interface MTU - Default 1242. – For optimal performance, set at 1242.
Entering a value other than 1242 may reduce system performance, especially if set
to a higher value. Flexibility of using other values may be useful in testing or for
particular operational conditions.
Range is 576 to 1500.