User's Manual

001-2019-500 Rev 0
Paragon4 – UHF, 700 & 800MHz User Manual
26
6.6.3 Unit Status ►Diagnostics
Figure 16 - Unit Status – Diagnostics
Item
Description
Analog Values
Chassis power supply
Displays chassis power supply voltage
Power amplifier pow-
er supply
Displays power amplifier power supply voltage. Available only if extra wires are added
from the PA +/- supply terminals and the P4 backplane TB1-1 / TB1-2 terminals.
Forward power
Displays forward power when the optional external power sensor assembly (p/n 030-
03547-xxx) is installed.
Note: Power measurement units (dBm or Watts) are user defined under Setup Advanced
►User Settings
Reverse power
Displays reverse power when the optional external power sensor assembly (p/n 030-
03547-xxx) is installed.
Note: Power measurement units (dBm or Watts) are user defined under Setup Advanced
►User Settings