User's Manual

001-2019-500 Rev 0 Paragon4 – UHF, 700 & 800MHz User Manual
57
6.8.6 Setup (Advanced) IP Optimization
Figure 49 - Setup (Advanced)-Optimized IP Settings
Item Description
RF ACK
Disabled (Default) - TCP packets are always RF acknowledged regard-
less of this option setting.
Enabled - Use when packets need to be acknowledged at the RF level
by the remote unit (destination unit). This option is applicable to all
packet types other than TCP.
OIP Retries Number of OIP retries. Default = 2
Preliminary