User's Manual

001-2019-500 Rev 0 Paragon4 – UHF, 700 & 800MHz User Manual

Item Description

SNMP

Simple Network Management Protocol – Disabled, Enabled (Default)

SNMP provides means to monitor, collect, and analyze diagnostic information.

Enabling SNMP allows the MIB (Management Information Base) in the Paragon4

to be viewed using an external MIB browser or network management software.

Trap IP List

After reset, the Paragon4 sends a WARMSTART trap to all of the IP addresses

defined in the Trap IP list. It signifies that the system has started.

To add an address to the Trap IP List: Select Add and type the new IP address to

be added to the read-only Trap IP list. The window will expand downward to show

all addresses in the list.

To delete an address to the Trap IP List: Select Delete and type the new IP ad-

dress to be deleted from the read-only Trap IP list.

MIBS

Management Information Base -used to assemble and interpret SNMP messages.

The Dataradio Paragon4 MIB is bundled with each unit's firmware. Click "Down-

load mibs.zip" and a pop-up dialog box will appear in your browser asking you to

open or save the file to your PC. Save the zip file to a desired location. Unzip the

contents of mibs.zip file to a location where your SNMP manager can find it.

Note: SNMP must be enabled in order for the host PC SNMP manager to work.

Preliminary