User's Manual

120 20194-102 Paragon3 – 700/800MHz User Manual

1.2.1 Features

• Parallel Decode (PD) technology featuring a diversity SDR receiver module for added decode

sensitivity in multi-path and fading environments.

• Fully IP-based product line, using an optimized IP layer that reduces IP overhead for the RF link

• Sophisticated dual DSP-based modem design provides added system performance, fewer retries

and more effective throughput.

• 700MHz / 50 kHz and 800MHz/25kHz channels for the Public Safety band of operation:

767-773 MHz TX and 851-869 MHz TX

• Full duplex operation

• Base Station with 70W RF Power Amplifier (user adjustable from 35W)

• On-air data speeds and modulation types supported:

Table 1 - On-air data speeds and modulation types

Modulation type Channel spacing – 25 kHz Channel spacing – 50 kHz

SRRC4FSK

32 kb/s 64 kb/s

SRRC8FSK

48 kb/s 96 kb/s

SRRC16FSK

64 kb/s 128 kb/s

• Uses Dataradio’s Next generation high-efficiency Enhanced-DBA over-the-air protocol

• Over-the-air compatible with GeminiG3 mobile products

• Out-of-band signaling enables transmission of GPS reports with no effect on system performance.

• Flash programmable firmware, including over-the-air programming capability

• Paragon3 units are factory-configured based on each customer’s network system requirements

1.2.2 Configuration

Paragon3 units are factory-configured. Configuration changes or upgrades are WEB-based.