User's Manual
Table Of Contents
- 1 VIPER OVERVIEW
- 2 SYSTEM ARCHITECTURE AND NETWORK PLANNING
- 3 DATARADIO VIPER QUICK START
- 4 VIPER WEB MANAGEMENT
- 5 UNIT STATUS
- 6 SETUP (BASIC)
- 7 SETUP (ADVANCED)
- 7.1 RF OPTIMIZATIONS
- 7.2 IP SERVICES
- 7.3 IP ADDRESSING
- 7.4 IP OPTIMIZATION
- 7.5 IP ROUTING (TABLE/ENTRIES)
- 7.6 TIME SOURCE
- 7.7 ALARM REPORTING
- 7.8 USER SETTINGS
- 8 SECURITY
- 9 STATISTICS
- 10 MAINTENANCE
- 11 NEIGHBOR MANAGEMENT
- 12 NETWORK OPTIMIZATION
- 13 UPGRADING YOUR FIRMWARE
- VIPER SPECIFICATIONS
- PRODUCT WARRANTY
- DEFINITIONS
.6 TIME SOURCE 7
Figure 7.25 - Setup (Advanced)
D
Time Source
7.6.1 SNTP
Simple Network Time Protocol (SNTP) is a protocol for synchronization of clocks of computer
systems (Vipers) o will poll the time
server for the time information update.
Client
Enter the IP Address of the SNTP Server in dot decimal format.
Period
Enter the period (in seconds) at which the SNTP Server is polled.
SNTP UTC Time
(default)
onds).
ver the Internet. When SNTP client is enabled the Viper
Select: Enabled, Disabled; Default: Disabled
Server Address
Default: 0.0.0.0
Default: 64
0
Displays the last update received from the SNTP Server (in sec
7.6.2 Time Zone
Time Zone
Select from List: local time zone; Default: (GMT) Greenwich Mean Time
001-5008-000(Rev8) Page 80