User's Manual
Table Of Contents
- 1 VIPER OVERVIEW
- 2 SYSTEM ARCHITECTURE AND NETWORK PLANNING
- 3 DATARADIO VIPER QUICK START
- 4 VIPER WEB MANAGEMENT
- 5 UNIT STATUS
- 6 SETUP (BASIC)
- 7 SETUP (ADVANCED)
- 7.1 RF OPTIMIZATIONS
- 7.2 IP SERVICES
- 7.3 IP ADDRESSING
- 7.4 IP OPTIMIZATION
- 7.5 IP ROUTING (TABLE/ENTRIES)
- 7.6 TIME SOURCE
- 7.7 ALARM REPORTING
- 7.8 USER SETTINGS
- 8 SECURITY
- 9 STATISTICS
- 10 MAINTENANCE
- 11 NEIGHBOR MANAGEMENT
- 12 NETWORK OPTIMIZATION
- 13 UPGRADING YOUR FIRMWARE
- VIPER SPECIFICATIONS
- PRODUCT WARRANTY
- DEFINITIONS
The eight branches expand into additional branches and leaves. The last two nodes are
single leaves that perform specific functions following changes to the main branches. Again,
all Viper MIB objects can be accessed through a MIB browser.
Figure 7.6 - Viper OID Tree
7.2.3 SNMP Configuration
To access SNMP configuration page select Setup (Advanced) from the main menu and then
click “IP Services”. The page displayed will include SNMP configuration screen (shown in
Figure 7.7).
Figure 7.7 - Viper SNMP
001-5008-000(Rev8) Page 67