User's Manual
Table Of Contents
- 1 VIPER OVERVIEW
- 2 SYSTEM ARCHITECTURE AND NETWORK PLANNING
- 3 DATARADIO VIPER QUICK START
- 4 VIPER WEB MANAGEMENT
- 5 UNIT STATUS
- 6 SETUP (BASIC)
- 7 SETUP (ADVANCED)
- 7.1 RF OPTIMIZATIONS
- 7.2 IP SERVICES
- 7.3 IP ADDRESSING
- 7.4 IP OPTIMIZATION
- 7.5 IP ROUTING (TABLE/ENTRIES)
- 7.6 TIME SOURCE
- 7.7 ALARM REPORTING
- 7.8 USER SETTINGS
- 8 SECURITY
- 9 STATISTICS
- 10 MAINTENANCE
- 11 NEIGHBOR MANAGEMENT
- 12 NETWORK OPTIMIZATION
- 13 UPGRADING YOUR FIRMWARE
- VIPER SPECIFICATIONS
- PRODUCT WARRANTY
- DEFINITIONS
001-5008-000(Rev8) Page 26
Figure 2.5 - Viper Bridge Mode Configuration
2.9.2
Router Mode
Router mode provides network configuration flexibility and adds RF diagnostics capability for
Viper wireless modems. Router mode also allows greater flexibility in using different
protocols. Diagnostics can be retrieved through the Ethernet port of the Viper. This
configuration is recommended for users who have IT/Network support readily available to
them and the authorization required to make changes in the network. Router mode
requires set up of IP/Ethernet and Serial IP addresses. Figure 2.6 shows a Viper Router
Mode configuration.
Figure 2.6- Viper Router Mode Configuration
Viper
192.168.205.1
Viper
192.168.206.1
PLC
192.168.206.2
Viper
192.168.207.1
PLC
192.168.207.2
Viper
192.168.208.1
PLC
192.168.208.2
HMI/PLC
192.168.205.2
HMI/PLC
192.168.205.10
Viper
192.168.205.1
Viper
192.168.205.3
PLC
192.168.205.40
HMI/PLC
192.168.205.10
HMI/PLC
PLC
192.168.205.100
192.168.205.30
PLC
192.168.205.20
Viper
192.168.205.2
Viper
192.168.205.4