User's Manual

REVISION HISTORY
REV DATE REVISION DETAILS
0 Jan 11, 2008
Initial Release as 001-5008-000.
1 May 2008
Update Dual Port Viper information.
2 September 2008
Added information about SNMP.
Updated Firmware Upgrade instructions.
3 December 2008
Added information about TCP Client Server Mode.
Added information about Saving/Restoring User
Configuration files.
4 April 2009
Added information about V1.5 Viper code release.
Added information about TCP Proxy Feature.
Added note to RF Acknowledgment section.
Corrected Viper Power Cable Part in Accessory Table.
Added specifications and part number for 900 MHz Viper.
Updated RF Exposure Compliance requirements.
Added section 2.10, Choosing an IP Addressing Scheme
5 July 2009
Added information about V1.6 Viper code release.
Added information about Listen Before Transmit Disable
feature.
Added section about RF MAC override feature.
Added section about the Periodic Reset feature.
Added screen shot and information for the “Add Static
Entry” function
6 September 2009
Added Listen Before Transmit Disable Feature
(Previously Read: Added Listen Before Talk Disable
Feature)
7 November 2009
Updated user manual for product name change from
ViPR to Viper
8 June 2010
Added UL information.
Added information and specifications for Viper-200
Added information about V1.7 Viper firmware Release
Corrected radio firmware upgrade command line
instructions errors in Section 13.3 that were introduced
in revision 7 of the user manual.
Added section about VPN
Added section about Radius
Updated SNMP section
Updated screen captures and descriptions