User's Manual

001-5008-000(Rev8) Page 117
200-Build Date: . . . . Nov 05 2009
200-Build Time: . . . . 07:47:45
M-03_10-R
200-ASD Data Map: . . . 2.0
200-Radio Serial Number: 405163
revision.
200-Copyright:. . . . . Copyright 2008 DRL
200-Firmware Version: . FIR
200-Radio Circuit Board: 0.10
200 Radio Model Number: 823-5028-452
Check that the “Firmware Version:” shows the latest firmware
Fig .
reset” in the CLI then pressing enter.
13.3 VERIFY FILE INTEGRITY
1. t’s IP address.
2. the Welcome page to load.
3. ct UNIT STATUS. The Unit Identification and Status pane should
firmware in its Banner and the H/W Status should also
ane, select MAINTENANCE D PACKAGE CONTROL. Wait a few moments
the
sfer for the failed files(s) again. If the problem persists, please have the PACKAGE
y and contact CalAmp Technical Services at the numbers provided in
e front of this manual.
ure 13.2 - Using Windows Command Prompt to upgrade Radio Firmware
5. Restart the Viper.
Tip: You can restart the Viper by typing “station
Using your browser, connect to the uni
Enter the user name and password. Allow
In the left pane, sele
display the newly upgraded
show Ok.
4. In the l
for the results to display.
eft p
If the message in the result screen points out that file(s) failed the integrity check, retry
FTP tran
CONTROL results read
th