User's Manual

 Dynamic
A "Dynamic" neighbor entry is one that has been learned by the neighbor discovery
algorithm. It can be updated or deleted by the neighbor Discovery algorithm when it
detects changes in the topology.
 Locked
A "Locked" neighbor entry is a "Dynamic" neighbor entry saved into nvram. The "Locked"
neighbor entry behaves like a "Dynamic" neighbor except it is saved into nvram and will be
ectly. When HOP COUNT is more than 1, it can be reached by passing
though another Viper as identified by the NEXT HOP field.
 Clear List
Clears the entries in the list and routing tables. If Auto-Scan is enabled, the neighbor list
ically. If Manual-Scan is enabled, the neighbor list can be
repopulated by clicking the “Force Scan” button.
list to ensure an RF path between the units.
recovered after a reboot.
11.4.3 Route to Neighboring Vipers
 Hop Count and Next Hop
Indicates the route the remote Viper can be reached - when HOP COUNT is 1, the device
can be reached dir
11.5 CONTROL OPERATIONS
will be repopulated automat
 Force Scan
Starts the Scanning for Neighbors process.
 Test Connectivity
Pings each Viper in the
 Add Static Entry
Figure 11.3 - Viper Add Static Neighbor Entry
001-5008-000(Rev8) Page 108