User's Manual

#9 ViPR User Manual_Rev2.doc Page 89
Figure 11.4 Network Status
To query the ViPR for the status of all its neighbors, select the Get Status option then press
the "Apply" button under Network Management -> Maintenance.
MAINTENANCE
The Network Maintenance page allows the user to make changes to a single ViPR unit or the
entire ViPR network. This allows the user to make changes to the remote units' neighbor
tables.
Figure 11.5 Network Maintenance
 Delete Station
The user enters the RF MAC Address of the station to be deleted from the Neighbor Table of
all ViPRs in the network.
 Replace Station
The user enters the old RF MAC Address (the unit to be replaced) and the new RF MAC
Address (that will replace the old ViPR). This will update the Neighbor Table of all the ViPRs
in the network.
 Change ND mode
The user can change the Neighbor Discovery mode of all ViPRs in the network to Manual-
Scan, Auto-Scan, or Disable.