User's Manual

#9 ViPR User Manual_Rev2.doc Page 68

IP ROUTING (TABLE/ENTRIES)

Figure 7.22 Setup (Advanced)

IP Routing Web Page

 Routing Table

Displays the table of IP routes that are active in the ViPR. The routing table will be

populated by the Neighbor Discovery process and/or by manual entries.

 Destination Network

Displays the IP Address and Netmask of a route.

 Gateway

Displays the IP Address and the RF MAC address (if route is pointing to another ViPR) of the

destination gateway.

 Type

There are three different types of routes:

Connected: Direct physical connection on the Ethernet port.

Static: User-defined routes.

Proprietary: Routes learned by the ViPR unit that point to over-the-air destinations.

 Routing Entries

This section allows the user to manually enter new routes or delete existing routes.