User's Manual

#9 ViPR User Manual_Rev2.doc Page 28
Figure 3.7 Using the Setup Wizard: Step 1
STEP 2: Each ViPR is programmed with these defaults:
IP Address: 192.168.205.1
Network Mask: 255.255.255.0
Default Gateway: 0.0.0.0
Figure 3.8 Using the Setup Wizard: Step 2
To monitor or change configuration remotely, each unit requires a unique IP
Address. When configuring more than one unit, be sure to increment IP addresses.
Click “Apply”. Click “Next”.