User's Manual

#9 ViPR User Manual_Rev2.doc Page 13

PART NUMBERS AND AVAILABILITY

ViPR Radio

Table 1.5 provides a breakdown of the ViPR part number 140-50X8-Y0Z.

Table 1.5 - Part Number Breakdown

X Y

1 VHF 5 136 – 174 MHz

0 Standard

4 UHF 3 406.1 – 470 MHz

1 Dual-Port

4 UHF 5 450 – 512 MHz

9 900 5 928 – 960 MHz

Accessories and Options

Tables 1.6-1.8 list standard accessories (including antenna, feedline, and connectors) tested

and approved for use with the ViPR.

Table 1.6 - Accessories

ITEM PART NUMBER

Power Cable 697-5100-001

ViPR Demo Kit* – VHF - 136-174 MHz 250-5018-500

ViPR Demo Kit* – UHF - 406-470 MHz 250-5048-300

ViPR Demo Kit* – UHF - 450-512 MHz 250-5048-500

Factory Installed ViPR Fan Kit 150-5008-001

Field Installed ViPR Fan Kit** 150-5008-002

TNC-Male to N-Male 18” 250-0697-103

TNC-Male to N-Male 48” 250-0697-104

TNC-Male to N-Male 72” 250-0697-105

TNC-Male to N-Female 18” 250-0697-106

* The ViPR Demo Kit includes two of each of the following: ViPR, rubber duck antennas, adapters, attenuators,

power cables, and power supplies.

** The field install Fan Kit is available for all UHF/900 ViPRs (140-5048-xxx/140-5098-xxx) but is only available for

VHF models-(140-5018-xxx) with RF revision 0.3 or greater (shipping Fall 2008). Contact CalAmp Technical

Support for more information.