User Manual


GuardianManual001‐5006‐000Rev0 53|Page
RemotePacketsRx’ed
HostPacketsreceivedshowsthenumberofdatapacketstheRemotedevicehasreceivedfromtheMaster.
HosttoRemote%
HosttoRemotepercentageshowsthepercentageofpacketstheHostdevicehassuccessfullysenttotheRemote.
RemotePacketsTx’ed
RemotePacketstransmittedshowsthenumber
ofdatapacketsthattheRemotedevicehasreturnedtotheHost.
HostPacketsRx’ed
HostPacketsreceivedshowsthenumberofdatapacketstheHostdevicehasreceivedfromtheRemote.
RemotetoHost%
RemotetoHostpercentageshowsthenumberofpacketstheRemotedevicesuccessfullysent
totheHost.
Overall%
OverallpercentageshowsthepercentageofHostreceivedpacketsversusHosttransmittedpackets.
#ofPacketstoSend
NumberofPacketstoSendprogramsthenumberofpacketstheHostshouldsendtotheRemotebeforestopping.
BytesofData/Packet
BytesofData/
PacketistheprogrammablenumberofdatabytesineachpackettheHostsends.TheRemotewill
respondwiththesamenumberofpackets.
COMPort/NetworkRatio
COMPort/NetworkRatioistheratiooftheCOMportbaudratetonetwork(overtheair)baudrateofamodem.
Thisisused
ifthenetworkbaudrateisslowerthantheCOMportbaudrate.IftheCOMportbaudrateis9600and
thenetworkbaudrateis4800,settheratioto2.Ifthetwoarethesame,setthisfieldto1.
PacketDelay(s)
PacketDelay(s)is
thenumberofsecondsfortheHosttodelaybetweensendingeachpacket.Thisfieldranges
from0.00to10.00seconds(in0.25secondintervals).
Host/Remote
Host/RemoteisusedtoconfigureCOMportoptions.
• Host(PrimaryPort)‐ConfigurestheprimaryCOMportastheHostdevice(thedeviceinitiating
packetsto
theRemotedevice.
• Remote(PrimaryPort)‐ConfigurestheprimaryCOMportastheRemotedevice(thedevicerespondingto
thepacketsfromtheHostdevice).