User Manual


GuardianManual001‐5006‐000Rev0 40|Page
Figure5.6SetupRadio/ModemFrequenciesParameters
Chan
Chandisplaysthefrequencychannelpair.
RxFrequency
RxFrequencydisplaysthereceivefrequencyforthechannelpair.
TxFrequency
TxFrequencydisplaysthetransmitfrequencyforthechannelpair.
Power
PowerdisplaysthePowerOutputAdjustvalueforthechannelpair.Thedefaultvalueis255(5watts).This
value
shouldbeleftatthedefaultvalueunless:
• alowerpowerisrequiredtomeetregulatoryrequirementsor
• theuser’sapplicationrequiresanincreaseinthetransmitdutycycle
DefaultFreqs
TheDefaultFreqsbuttonforcestheRxandTxFrequenciestotheirdefaultvalues,basedon
radiotypeandrange.