User Manual


GuardianManual001‐5006‐000Rev0 36|Page
ProductMode
Speeddiag.offdiag.ondiag.offdiag.on
T‐96S4800b/s30ms54ms60ms85ms
T‐96S9600b/s30ms41ms60ms75ms
GUARDIAN9600b/s20ms32ms40ms55ms
GUARDIAN19200b/s20ms
28ms40ms50ms
Note:If9DataBits,2StopBitsisselected,RemoteDiagnosticsorCommandsarenotsupportedandOnline
Diagnosticsmustbedisabledforpropernetworkdataoperation.Important:Allunitsinanetworkmustusethe
sameDataFormatsetting.
5.1.4.2 DATATYPE
DataTypebehaviorisdependentonthemodemconnectedtotheuserPC.
• ConnectedtoaGUARDIANModemoperatingin“GUARDIANNative”networktype:EnhancedOnlyData
Type
• ConnectedtoaGUARDIANModemoperatingin“T‐96S/DL3276”(orCrystal)networktype:Enhancedor
CompatibleDataType
Note:Choose“Compatible”
ifthemodemistobeusedwithRNet9600S(crystal)orT‐Modem96(crystal)units
withserialnumbersbelow103500.Thebuffericontotherightofhisoptionwillturntoaninvertingbufferwhen
“Compatible”isselected.Choose“Enhanced”forotherapplicationstoachievebetterperformance.Important:
All
unitsinanetworkmustusethesameDataFormatsetting.
5.1.4.3 NETWORKTYPE
InterdependentwithBaudRateandDataType,NetworkTypeallowsover‐the‐aircompatibilityandvaries
accordingtotheproductsusedinthenetwork.NetworkTypeisdependentonthemodemconnectedtotheuser
PC.
Figure5.3NetworkTypeConnectedtoaGUARDIANModem
