User's Manual

001-5008-000 rev5_2.doc Page 89
10.5 RF TESTS
 Test Tones
Allows the user to choose from Unmodulated, Random Data, and 1 KHz Sine Wave test
tone.
The test tone will transmit for 20 seconds when the "Start Test" button is clicked. The "Stop
Test" button will end the test immediately. Note: This test may cause other ViPRs to stop
transmitting for the duration of the test. ViPR units have a feature that checks if another
carrier (RX frequency signal) is present. If a carrier is detected, the ViPR will not transmit
until the carrier is no longer present.
Figure 10.7 – Maintenance
D RF Tests Web Page
10.6 FEATURE OPTIONS
The Feature Option web page lists the available add on features and shows which features
are currently installed in the ViPR.
Option # Name Description
009 SNMP Allows SNMP agent activation on the unit.
Table 10.1 – Available Feature Options