User's Manual

001-5008-000 rev5_2.doc Page 66
Figure 7.10 Private to Public Packet flow
Note: Host 1 will be able to ping Host 2, however Host 2 will not be able to ping or
originate a message to Host 1 when NAT Eth enabled.
7.2.5 RF Interface Private
Figure 7.11 shows the NAT enabled for the RF interface.
Figure 7.11 NAT on ViPR: RF interface considered private
Packet (1)
Source Address 192.168.205.2
Destination Address
172.31.5.2
Packet (1)
Source Address 10.0.14.203
Destination Address
172.31.5.2
Packet (1)
Source Address 10.0.14.203
Destination Address
172.31.5.2
Host 1
192.168.205.2
Host 2
172.31.5.2
V
iPR 1
NAT enabled, 192.168.205/24,
Eth is private
V
iPR 2
NAT disabled
Private Network
RF Network
Public Network