Manualshelf

User's Manual

ManualsBrandsCalAmp Wireless Networks ManualsElectronicsNarrrowband IP Modem/Router
21222324252627282930
001-5008-000 rev5_2.doc Page 24
Figure 2.5 ViPR Bridge Mode Configuration
2.9.2 Router Mode
Router mode provides network configuration flexibility and adds RF diagnostics capability for
ViPR wireless modems. Router mode also allows greater flexibility in using different
protocols. Diagnostics can be retrieved through the Ethernet port of the ViPR. This
configuration is recommended for users who have IT/Network support readily available to
them and the authorization required to make changes in the network. Router mode
requires set up of IP/Ethernet and Serial IP addresses. Figure 2.6 shows a ViPR Router Mode
configuration.
Figure 2.6 ViPR Router Mode Configuration
ViPR
192.168.205.1
ViPR
192.168.206.1
PLC
192.168.206.2
ViPR
192.168.207.1
PLC
192.168.207.2
ViPR
192.168.208.1
PLC
192.168.208.2
HMI/PLC
192.168.205.2
HMI/PLC
192.168.205.10
ViPR
192.168.205.1
ViPR
192.168.205.3
PLC
192.168.205.40
HMI/PLC
192.168.205.10
HMI/PLC
192.168.205.100
PLC
192.168.205.30
PLC
192.168.205.20
ViPR
192.168.205.2
ViPR
192.168.205.4