User's Manual

001-5008-000 rev5_2.doc Page 13
1.4 PART NUMBERS AND AVAILABILITY
1.4.1 ViPR Radio
Table 1.5 provides a breakdown of the ViPR part number 140-50X8-Y0Z.
Table 1.5 - Part Number Breakdown
Model Number Description
Frequency Range
140-5018-500 Standard VHF ViPR 136 - 174 MHz
140-5028-502 Standard VHF ViPR 200
215 – 240 MHz
140-5048-300 Standard UHF ViPR Range 3
406.1 - 470 MHz
140-5048-500 Standard UHF ViPR Range 5
450 – 512 MHz
140-5098-500 Standard 900MHz ViPR
928 – 960 MHz
140-5018-501 Dual Port VHF ViPR
136 - 174 MHz
140-5028-503 Dual Port VHF ViPR 200 215 – 240 MHz
140-5048-301 Dual Port UHF ViPR Range 3
406.1 - 470 MHz
140-5048-501 Dual Port UHF ViPR Range 5
450 – 512 MHz
140-5098-501 Dual Port 900MHz ViPR
928 – 960 MHz
1.4.2 Accessories and Options
Tables 1.6-1.8 list standard accessories (including antenna, feedline, and connectors) tested
and approved for use with the ViPR.
Table 1.6 - Accessories
ITEM PART NUMBER
ViPR Power Cable 897-5008-010
ViPR Demo Kit* – VHF - 136-174, 215-240 MHz 250-5018-500
ViPR Demo Kit* – UHF - 406-470 MHz 250-5048-300
ViPR Demo Kit* – UHF - 450-512 MHz 250-5048-500
Factory Installed ViPR Fan Kit 150-5008-001
Field Installed ViPR Fan Kit** 150-5008-002
TNC-Male to N-Male 18” 250-0697-103
TNC-Male to N-Male 48” 250-0697-104
TNC-Male to N-Male 72” 250-0697-105
TNC-Male to N-Female 18” 250-0697-106
* The ViPR Demo Kit includes two of each of the following: ViPR, rubber duck antennas, adapters, attenuators,
power cables, and power supplies.
** The field install Fan Kit is available for all UHF/900 ViPRs (140-5048-xxx/140-5098-xxx) but is only available for
VHF models-(140-5018-xxx) with RF revision 0.3 or greater (shipping Fall 2008). Contact CalAmp Technical
Support for more information.