User's Manual

001-5008-000 rev5_2.doc Page 100
12.2.3 Increase OIP and MAC Retries Limit
OIP retries and MAC retries are only available in Router mode. The MAC Retry Limit is
normally set to 1 and the OIP Retry Limit is normally set to 2. Gradually increasing these
limits (up to 3 in extreme cases), may provide a slower, but more reliable link impossible
with weak signals. Use in conjunction with the slower over-the-air network bit rate for the
system’s bandwidth.
The number of MAC retries can be configured on the ViPR’s web pages under Setup
(Advanced) D RF Optimizations. The number of OIP retries can be configured under Setup
(Advanced) D IP Optimization.