User Manual
Table Of Contents
- 1.
- 1. Product Overview
- 2. Installation
- 3. Physical Description
- 4. Operation & Configuration
- 4.1 Browser-Based Setup and Status
- 4.2 LAN Setup
- 4.3 Login Screen
- 4.4 Interface
- 4.5 Setup Wizard (Bridge Mode)
- 4.6 Default IP Settings
- 4.7 IP Network Settings
- 4.8 Advanced IP Settings
- 5. Optimization & Troubleshooting
- 6. Specifications
120 40520-100a ViPR User Manual
71
TX to RX Time < 1ms
Channel Switching Time < 15ms (Band-End to Band-End)
Carrier to Data Time None (140 µs)
Modem / Logic
25 kHz Channel 12.5 KHz Channel 6.25 kHz Channel
Data Rate (User Selectable) 16 kb/s
32 kb/s
8 kb/s
16 kb/s
4 kb/s
8 kb/s
Modulation Type 2FSK, 4FSK
Addressing IP
SETUP and COM Port
Interface EIA RS-232F DE9F
Data Rate 300 – 115,200 b/s (Defaults: Setup = 115.2Kbps, COM = 9.6 Kbps)
Display
5 Bi-color status LEDs Power, Status, LAN Link/Activity, Collision, Rx/Tx
Connectors
Antenna Connector Half Duplex/Simplex: TNC female (Tx/Rx)
Full Duplex: TNC female (Tx) & SMA female (Rx)
Serial Setup Port DE-9F
Serial Terminal Server DE-9F
Ethernet RJ-45 10/100 BaseT auto-MDIX
Power Header Power Plug Power -I/O
DRL p/n 415-7108-113
(Weidmüller p/n 1615550000)
4 Pin, 3.5mm, Power Header
DRL p/n 415-7140-113
(Weidmüller p/n 1639260000)
4 Pin, 3.5mm, Power Plug
Diagnostics
Message elements
IP or MAC Address, Thinning value, Flag/Voltage source, Voltage, Temperature, Packet
Error Rate, Carrier Level, Average Background Level, Forward power, Reverse power
FCC / IC / UL Certifications
FCC IC (DOC) UL
136 – 174 MHz NP4-5018500 773B-5018500 Pending
406.1 - 512 MHz NP4-5048300 773B-5048300 Pending