User Manual
Table Of Contents
- 1.
- 1. Product Overview
- 2. Installation
- 3. Physical Description
- 4. Operation & Configuration
- 4.1 Browser-Based Setup and Status
- 4.2 LAN Setup
- 4.3 Login Screen
- 4.4 Interface
- 4.5 Setup Wizard (Bridge Mode)
- 4.6 Default IP Settings
- 4.7 IP Network Settings
- 4.8 Advanced IP Settings
- 5. Optimization & Troubleshooting
- 6. Specifications
120 40520-100a ViPR User Manual
62
4.8.7 Radio - RF Tests
To guard against an inadvertent or accidental mishap, Dataradio strongly recommends saving the parame-
ters to the unit BEFORE running this test. Use the “Save Config” button at the bottom of the navigation
menu. This test is especially useful for testing the power output with a wattmeter.
Figure 54 - RF Tests
Item Description
Start Test
Test frequency is xxx.xxx MHz, carrier only (no modulation)
RF Power will be as configured in:
“Setup (Basic)” Î “RF Setup” (30 to 40 dBm)
Stop Test ViPR unit resets after 20 seconds if the Stop Test button is not pressed.
4.8.8 Help
Figure 55 - Help Icon
Item Description
Help Icon
Click the Help Icon in the navigation pane to open a help text relating to
the window being displayed.