User Manual
Table Of Contents
- 1.
- 1. Product Overview
- 2. Installation
- 3. Physical Description
- 4. Operation & Configuration
- 4.1 Browser-Based Setup and Status
- 4.2 LAN Setup
- 4.3 Login Screen
- 4.4 Interface
- 4.5 Setup Wizard (Bridge Mode)
- 4.6 Default IP Settings
- 4.7 IP Network Settings
- 4.8 Advanced IP Settings
- 5. Optimization & Troubleshooting
- 6. Specifications
120 40520-100a ViPR User Manual
42
4.8.3 Setup (Advanced)
4.8.3.1 LAN (IP)
Figure 29 - Advanced IP Configuration - LAN (IP)
Item Description
MTU
Ethernet Interface MTU - Default 1500 bytes. - Entering a value lower than 1500 may
reduce system performance. Range is 576 to 1500.
MAC address Ethernet Interface MAC address in HEX format (factory-set).
Default IP Gateway Con-
trol
Disabled(Default), Enabled – By design, the Sync Master unit in a typical network
acts as Default IP Gateway for the remote(s). In some networks (such as store and
forward), setting one of the remotes to “Enable” permits designating it as the Default
IP Gateway unit.