User Manual

120 40520-100a ViPR User Manual
31
6. On page five (
Figure 17) of the Setup Wizard, read the on-
screen instructions. If configuring for Router mode, you
have completed. For Bridge mode, click the “Switch to
Bridge mode” button and follow the instructions below for
both modes of operation:
Click one of the “Save Config” buttons. Wait for the Prog-
ress bar activity to stop
The status reports: “Success. Click on “Reset Unit” button.
Wait for the Progress bar activity to stop. A “Station
Reset” 20-second timer counts down while the status
reports: “Working…”When done, the status reports:
“Ready”.
Figure 17 - Setup Wizard - Page Five (Router mode)
Figure 18 - Setup Wizard – Page Five (Bridge mode)