User Manual
Table Of Contents
- 1.
- 1. Product Overview
- 2. Installation
- 3. Physical Description
- 4. Operation & Configuration
- 4.1 Browser-Based Setup and Status
- 4.2 LAN Setup
- 4.3 Login Screen
- 4.4 Interface
- 4.5 Setup Wizard (Bridge Mode)
- 4.6 Default IP Settings
- 4.7 IP Network Settings
- 4.8 Advanced IP Settings
- 5. Optimization & Troubleshooting
- 6. Specifications
120 40520-100a ViPR User Manual
22
- Upon DTR assertion: the session in established (bringup) phase
- Upon DTR negation: the session in closed (teardown) phase
CTS (Clear to Send) (pin 8) signal handling by the ViPR UART
• If CTS-based flow control is not used, always asserts CTS
• If CTS-based flow control is used:
♦ Asserted – If level of unprocessed data in internal RX buffers is below a threshold water-
mark
♦ Negated – If level of unprocessed data in internal RX buffers is above a threshold water-
mark