User Manual
Table Of Contents
- 1.
- 1. Product Overview
- 2. Installation
- 3. Physical Description
- 4. Operation & Configuration
- 4.1 Browser-Based Setup and Status
- 4.2 LAN Setup
- 4.3 Login Screen
- 4.4 Interface
- 4.5 Setup Wizard (Bridge Mode)
- 4.6 Default IP Settings
- 4.7 IP Network Settings
- 4.8 Advanced IP Settings
- 5. Optimization & Troubleshooting
- 6. Specifications
120 40520-100a ViPR User Manual
11
1. Product Overview
This document provides information required for the operation and verification of the DATARADIO
®
ViPR narrowband Ethernet IP radiomodem.
1.1 Intended Audience
This manual is intended for system designers, professional installers, and maintenance technicians.
1.2 General Description
Dataradio’s ViPR radiomodem is a DSP-based narrowband Ethernet IP radio that operates in the UHF
(406.1-512 MHz) and VHF (136-174 MHZ) frequency ranges.
The ViPR radiomodem is designed for SCADA, telemetry, control, and industrial applications in Point-
to-Point and Point-to-Multipoint configurations.
The ViPR radiomodem supports serial and Ethernet/IP Remote Terminal Units (RTU) and programmable
logic controllers (PLC). It is standard IEEE 802.3af compliant.
The ViPR wireless modem consists of two logic PCBs; one that includes the modem circuitry and the
other the radio module. Both are installed in a cast aluminum case.
The unit is not hermetically sealed and should be mounted in a suitable enclosure when dust and/or a cor-
rosive atmosphere are anticipated. There are no external switches or adjustments; all operating parameters
are set via a web browser.
Figure 1 – ViPR – to be updated when available