User Manual

3-8
Part No. 001-2100-101
Figure 3-7 Serial PC Port Settings Screens
3.2.5 PORT SETTINGS
Port Settings are used to configure the user PC’s serial COM ports (Primary and Secondary). Port Settings can be
used to test data links using the ASCII and HEX terminals (available in the Utilities menu). The JSLM
2
Field
Programming Software will override these settings when using any other screen to communicate with the JSLM
2
.
NOTE: A modem is required to transmit serial data using this program. The JSLM
2
is an analog signal device.
COM Port
The COM Port field allows the user to select the COM port number (1-4) for the Primary and Secondary COM
port.
Baud Rate
The Baud Rate field allows the user to select the communication speed for the Primary and Secondary COM ports.
Data Bits
The Data Bits field allows the user to select the number of Data Bits (4 - 8) to transmit or receive over the Primary
and Secondary COM ports.
Parity
The Parity field permits the user to select Parity Bits (None/Odd/Even) to transmit or receive for the Primary and
Secondary COM ports.
Stop Bits
The Stop Bits field permits the user to select the number of Stop Bits (1 or 2) to transmit or receive for the Primary
and Secondary COM Ports.