User Manual

3-2
Part No. 001-2100-101
Figure 3-2 JSLM
2
Field Programming Software Start-up Screen
3.2.2 RADIO PARAMETERS
The Setup JSLM
2
Parameters screen allows the user to view and edit the JSLM’s programmable parameters (see
Figure 3-3). The programmable parameters can be stored in a data file with the .DAT file extension by selecting
“Save Data File” from the file menu. These programmable parameters are used by the Read/Write Parameters
screen for programming into nonvolatile memory of the JSLM
2
.
3.2.2.1 SETTINGS TAB
The Settings tab allows the user to program various JSLM
2
operating parameters (see Figure 3-3).
ID Number
The ID Number is customer programmable from 0 to 4294967295.
NOTE: This ID is not the same as the printed serial number. Use the printed serial number to identify the unit’s
warranty status.