User Manual

3-7
Part No. 001-2100-101
Default Freqs
The Default Freqs button returns the Rx and Tx frequencies to default values. The default frequencies are based on
radio type and range.
Default Power
The Default Power button allows the user to return the Tx Power to factory power output settings.
3.2.3 VERSION REQUEST
Figure 3-6 JSLM
2
Version Request
Version Request displays JSLM
2
hardware and firmware version information.
3.2.4 READ/WRITE PROGRAMMABLE SETTINGS
Read Programmable Settings
Read Programmable Settings reads and displays the programmable settings currently programmed in the
EEPROM of the JSLM
2
.
Write Programmable Settings
Write Programmable Settings writes the currently loaded settings to the EEPROM of the JSLM
2
.
Clone Programmable Settings
Clone Programmable Settings clones (writes) the currently loaded programmable settings (except ID Number and
Comment) to the EEPROM of the JSLM
2
. Clone Programmable Settings is used to program a Data File (.DAT) to
multiple JSLM
2
s.