User Manual
Table Of Contents
- Product Overview
- Installation
- Physical Description
- Operation & Configuration
- Local and Remote (OTA) Configuration
- Over-the-Air Firmware Upgrade
- Browser-Based Setup and Status
- LAN Setup
- Login Screen
- Interface
- Test & Save Parameters Buttons Behavior
- Unit Status
- Setup (General)
- Basic IP Configuration
- RF Setup
- Terminal Server Configuration
- Advanced IP Configuration
- RF Network Setup
- Broadcast / Multicast
- IP Optimization & Tuning
- Simple Network Time Protocol
- Hopper Network
- Security
- Network Statistics
- Packet Statistics
- Event Log
- RF Test
- FTP Transfer
- RSSI Table
- Manuals & Support
- Troubleshooting & Testing
- Specifications
New Password
Enter a string of any letters or numbers of at least 8 and not exceeding
15 characters
New Password Re-enter the new password string
Encryption Disabled, Enabled
Encryption Key
All units in a network must have the same key. Enter a string of 32
(16bytes = 128 bits) hexadecimal characters (0 to F).
Displayed in pairs separated with spaces
4.3.3.14 Network Statistics
Table 16 - Network
Command Description
Data bytes presented
Control Acks Rx’d
Data packets sent
Data bytes delivered
Control Nacks Rx’d
Data packets Rx’d
4.3.3.15 Packet Statistics
Table 17 - Packet Statistics
Command Description
RX: Total packets received
RX: Total bytes received
RX: Packets
RX: Packets delivered
RX: Packets forwarded
RX: Packets miss
RX: Packets discard
RX: Packets Error
TX: Packets
TX: Packets miss
TX: Packets discard
TX: Packets Error
RX: Packets missed
RX: Erroneous packets
RX: Discarded packets
TX: Total packets sent
TX: Total bytes
TX: Packets missed
TX: Erroneous packets
IP Stats
TX: Discarded packets
RX: Total packets received
RX: Packets missed
RX: Erroneous packets
UDP Stats
RX: Discarded packets
120 40515-100a HiPR900 User Manual
27