User Manual
Table Of Contents
- Product Overview
- Installation
- Physical Description
- Operation & Configuration
- Local and Remote (OTA) Configuration
- Over-the-Air Firmware Upgrade
- Browser-Based Setup and Status
- LAN Setup
- Login Screen
- Interface
- Test & Save Parameters Buttons Behavior
- Unit Status
- Setup (General)
- Basic IP Configuration
- RF Setup
- Terminal Server Configuration
- Advanced IP Configuration
- RF Network Setup
- Broadcast / Multicast
- IP Optimization & Tuning
- Simple Network Time Protocol
- Hopper Network
- Security
- Network Statistics
- Packet Statistics
- Event Log
- RF Test
- FTP Transfer
- RSSI Table
- Manuals & Support
- Troubleshooting & Testing
- Specifications
4.3.3.6 Terminal Server Configuration
Table 8 - Terminal Server Configuration
Command Description
Port 1 - 2400, 4800, 9600, 19200, 38400, 57600, 115200
Baud Rate
Port 2 - 2400, 4800, 9600, 19200, 38400, 57600, 115200
Port 1 - Inactive, TCP Passive, TCP Active, UDP
Connection Mode
Port 2 - Inactive, TCP Passive, TCP Active, UDP
Local Port
Remote IP Address
Remote Port
4.3.3.7 Advanced IP Configuration
Table 9 - Advanced IP Configuration
Command Description
MTU Default 1500. Range 576 to 1500 bytes
Factory MAC address Factory Ethernet MAC address
DHCP Server Disabled, Enabled (Default).
DHCP Client Disabled(Default), Enabled
NAT Disabled(Default), Enabled
RIPV2 Disabled(Default), Enabled
4.3.3.8 RF Network Setup
Table 10 - RF Network Setup
Command Description
RF MAC Unit’s RF MAC address
Displays factory-assigned address: nnn.nnn.nnn.nnn “Factory”
RF IP Address
Entering 0.0.0.0 sets the RF IP Address to the factory default and high-
lights the “Factory” name (active address)
Entering nnn.nnn.nnn.nnn (RF IP Address of your choice) overrides the
factory default and highlights the “Override” name (active address)
RF Net Mask Set to valid common IP netmask for all units within a HiPR network
RF MTU Default 1500. Range 576 to 1500 bytes
4.3.3.9 Broadcast / Multicast
Table 11 - Broadcast / Multicast
Command Description
Broadcast Outbound mobile address
Broadcast Directed Enable Disabled, Enabled
Broadcast Limited Enable Disabled, Enabled
Multicast Addresses
Multicast Add / Delete Address Add, Delete and Relevant address
Multicast Enable Disabled, Enabled
120 40515-100a HiPR900 User Manual
25
Local IP Address