User Manual
Table Of Contents
- Product Overview
- Installation
- Physical Description
- Operation & Configuration
- Local and Remote (OTA) Configuration
- Over-the-Air Firmware Upgrade
- Browser-Based Setup and Status
- LAN Setup
- Login Screen
- Interface
- Test & Save Parameters Buttons Behavior
- Unit Status
- Setup (General)
- Basic IP Configuration
- RF Setup
- Terminal Server Configuration
- Advanced IP Configuration
- RF Network Setup
- Broadcast / Multicast
- IP Optimization & Tuning
- Simple Network Time Protocol
- Hopper Network
- Security
- Network Statistics
- Packet Statistics
- Event Log
- RF Test
- FTP Transfer
- RSSI Table
- Manuals & Support
- Troubleshooting & Testing
- Specifications
1. Product Overview
This document provides information required for the operation and preventive maintenance of the
DATARADIO
®
HiPR-900™ Spread Spectrum wireless modem.
1.1 Intended Audience
This manual is intended for system designers, professional installers, and maintenance technicians.
1.2 General Description
Dataradio’s HiPR-900 with Parallel Decode™ is a Frequency-Hopping Spread-Spectrum wireless radio-
modem that operates in the license free 902-928 MHz band using IP/Ethernet connectivity. HiPR-900 is
designed for SCADA, telemetry, control, and industrial applications in Point-to-Point and Point-to-
Multipoint configurations.
HiPR-900 supports both serial and Ethernet/IP Remote Terminal Units (RTU) and programmable logic
controllers (PLC). It is standard IEEE 802.3af compliant.
Figure 1 - HiPR-900
DATARADIO is a registered trademark, HiPR-900 and PARALLEL DECODE are trademarks of Dataradio Inc
120 40515-100a HiPR900 User Manual
9