Operating Manual

© CalAmp Sentry 4G-900 pico Base Station 63 Wireless (WiMAX) Parameters
2. To Add a row to the table click the „+‟ sign. To Remove the last row click the „–‟ sign. To
remove a selected row, mark the row and click the „–‟ sign.
3. Update the required parameters in the Pane table and click Apply.
The table provides neighboring Base Stations attributes.
6.4.3 DCD Triggers
This pane provides a table of the DCD Trigger Settings. Timing for handover triggers. Look for
neighbors in order to perform handover……
To access the DCD Triggers Settings pane
1. Click the Wireless menu option and then the MAC sub-menu option. From the MAC sub-
menus choose DCD Triggers. The DCD Triggers Settings pane is displayed.
2. To Add a row to the table click the “+” sign. To Remove the last row click the “–“ sign. To
remove a selected row, mark the row and click the “–“ sign.
3. Update the required parameters in the Pane table according to the following descriptions and
click Apply.
Field
Description
Number of DCD Triggers
Number of configured DCD triggers
Index
DCD Trigger Index.
Default: 0
Metric
This parameter specifies the DCD metric.
Values:
Default: CINR
Duration
This parameter specifies the average interval in
frames duration.
Values: [1,100]
Click to
add