Operating Manual

(To Remove the last row click the „–„ sign. To remove a selected row, mark that row and

click the „–„ sign.

3. To assign a service profile to an SS in the list:

Check the radio-button for the first SS to be assigned QoS and click the USF Settings

operation button. The following screen appears.

The screen provides the following interfaces:

MAC address of the selected SS

List of the available Service Flows

Operation buttons for assigning and disassociating service flows from a SS

The following operation buttons are available:

Subscribe – used to assign the selected SF to the SS

Unsubscribe – used to disassociate the selected SF from the SS

Back – go back to the Pre-Provisioned SS screen (to choose another SS).

4. Select an SF row, and click the Subscribe button. The SF is assigned to the SS.

5. Reset the SS- Base Station connectivity:

Resetting the connection of a single SS (in case the SF is applied on a Registration

Base):

Click the Subscribers menu option. Choose the Subscriber Management sub-menu

and then the Registered SS.

In the displayed Registered SS Information pane select the radio button of the

requested SS and click the Deregister button.

Select