Install Guide

23
2. Connect the Data Adapter to a Switch/Router by interconnecting the Data Adapters’
Ethernet port and the Switch/Router 10/100 Base T-port using a Cat5e cable.
3. Connect the Data Adapter to the 110V/220V AC mains using the supplied cable.
IMPORTANT!
BEFORE CONNECTING THE DATA ADAPTER TO THE MAIN OUTLET VERIFY THAT ALL SYSTEM COMPONENTS ARE
PROPERLY INSTALLED. MAKE SURE THAT ALL CABLE CONNECTORS ARE SECURELY POSITIONED IN THE
APPROPRIATE PORTS.
4. Verify that the Data Adapter LEDs, located on the front panel, are Green indicating an OK
status.
Data Adapter LED Indicators
Figure 6: Data Adapter Front Panel
The table below provides a description of the Data Adapter LED indicators.
Table 3. Data Adapter LED Description
LED
Color
Description
PWR
Green
Input power is connected
LAN
Green
LAN link/activity display
Ready
Green
System ready display