User's Manual
CONFIGURATION
001-9193-001 Version 2 Page 40 of 52 Sentry 4G
TM
User
Manual
Figure 21 - Interface Priority
5.7 General Settings
5.7.1 General Settings-Unit ID
The Sentry 4G unit identification number is configured under General SettingsUnit ID.
5.7.2 Advanced Settings-Password
The Sentry 4G unit’s web interface management login details are modified using the Password tab of
the Advanced Settings page.
To change the login details, enter the current and new password. The new password must be
entered twice (reconfirmed).
5.7.3 General Settings-Remote Administration
Figure 22 - Remote Admin
5.7.3.1 Remote Admin
Remote Configuration: Selecting Enabled will allow remote access to the unit’s
configuration screens through the WWAN network connection. Selecting Disabled will shut off
the ability to remotely access the unit’s configuration screens.
Configuration Port: Change the port of incoming requests. It is not necessary to change
this parameter unless it conflicts with other devices on the network.
Users can be logged into a single unit both locally and remotely at the same time.
Changes made on one end will not be reflected on the other unless the web page is
refreshed.