Instruction Manual

Weather Seal Door Accessories
INT-001
Intumescent
Adhesive Gasketing
INT-001 Intumescent Adhesive Gasketing
FOR MEETING STILE
APPLICATIONS
FOR FRAME
APPLICATIONS
1. When handling the adhesive gasket, avoid extending or expanding the item.
It may deform in size or affect the quality of the item.
2. Apply steady straight pressure when installing the gasket. Use appropriate
tools like seam roller to strengthen the gasket.
3. Avoid expanding the material when applying pressure using roller.
4. Inspect the gasket adhesion after a few hours that it has been installed.
5. Make sure to apply enough pressure when putting the gasket in the
HEAD JAMB.
- Cutting tools
- Rugs
Tools Required:
- Frame cleaner
- Seal sticker
Packaging includes:
6605 Flotilla Street, City of Commerce, CA 90040 U.S.A. | Website: www.cal-royal.com | Email: [e-mail]
Phone: [phone] | Fax: [phone]
INT-001
Installation Guidelines for INT-001 Intumescent Adhesive Gasketing
Door Frame Preparation:
Clean the door frame thoroughly with a good cleaning agent that removes
any particles that can affect the adherance of the gasket, dust, or cleanser
build-up. Check the frame surface if it is completely dry before installation.
Always use a cleaning agent that is not a petroleum base.
Preferred schedule for installation:
The best time (schedule) to install the ADHESIVE GASKET is when most
of the major work in construction has been completed or change occupancy
maintenance field of work. Where area is already in the cleaning phase of the
project time table. This is important to avoid foreign particles on the frame and
the adhesive during installation.
Important Reminder and Notice:
30