Instructions / Assembly

ASSEMBLY INSTRUCTIONS

ITEM NO: BO-3025DK

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

* TO REDUCE THE RISK OF ELECTRIC SHOCK, ALWAYS UNPLUG FROM THE ELECTRICAL

OUTLET BEFORE INSTALLATION.

* THIS FIXTURE IS SUITABLE FOR DRY LOCATION ONLY.

* THIS FIXTURE SHOULD ONLY BE CLEANED WITH A SOFT LINT FREE CLOTH DAMPLED WITH

WATER. DO NOT USE ANY CHEMICAL OR ABUSIVE CLEANER AS THEY MAY DAMAGE THE

SURFACE OF THE PRODUCTS.

THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER)

AS A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN

A POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET,

REVERSE THE PLUG. IF IT ST

Carefully place all parts on smooth surface to assembly.

1. TIGHTEN THE LAMP HOLDER RING（C）

TO SECURE THE METAL SHADE (B) TO THE

LAMP BODY (A).

2. INSTALL RECOMMENDED BULB

(NOT INCLUDED IN THIS PACKING).

INSERT PLUG INTO AN OUTLET AND ENJOY

YOUR LAMP!!

Use Max 60W type A bulbs

(bulbs not included)

PAGE 1
ASSEMBLY INSTRUCTIONS ITEM NO: BO-3025DK Carefully place all parts on smooth surface to assembly. 1. TIGHTEN THE LAMP HOLDER RING（C） TO SECURE THE METAL SHADE (B) TO THE LAMP BODY (A). A 2. INSTALL RECOMMENDED BULB (NOT INCLUDED IN THIS PACKING). B INSERT PLUG INTO AN OUTLET AND ENJOY YOUR LAMP!! C Use Max 60W type A bulbs (bulbs not included) * TO REDUCE THE RISK OF ELECTRIC SHOCK, ALWAYS UNPLUG FROM THE ELECTRICAL OUTLET BEFORE INSTALLATION. * THIS FIXTURE IS SUITABLE FOR DRY LOCATION ONLY.