Installation Sheet

ASSEMBLY INSTRUCTIONS:
ITEM NO.: BO-2668FL-3L-DB, BO-2668FL-3L-RU
1. Carefully unpack and lay out the parts as
shown illustration.
2. Fold extra wire into pole (B) and screw
pole (B) to pole (A).
3. Unscrew nut (F) out of pole (B), remove
washer (D),(E) , put base (C), washer
(D),(E) onto pole (B) in turn, make sure
the arc pole and the base at the same
direction, tighten the base (C) by nut (F)
with spanner (G).
4. Put mesh shade ( I ) and glass shade ( J )
onto the socket ( H ) tighten in with socket
ring ( K ), adjust the arc pole as the
drawing indicated. Make sure that the top
ring of the socket (H) is hanged on the
hook (L).
5. Install recommended bulb and insert the
polarized plug into an outlet , turn on the
switch and enjoy you lamp!!
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER
THAN THE OTHER) AS A SAFETY FEATURE TO REDUCE THE RISK OF
ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE
WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT
STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE
WITH AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY AND EASILY
INSERTED. DO NOT ATTEMPT TO ALTER THE PLUG.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Use 3*60 Wattage (Maximum) type A bulbs (bulbs included)

Summary of content (1 pages)