Use and Care Manual

Bracket Installation for HDMI
2
Life Vessel Pre-delivery Guide
LTR50001199, Rev. A
Bracket Installation for HDMI
1. Drill for the Placement of Metal Brackets
Drill and place 2 brackets (if desired) for the back wall placement in the cabinet of a wall-mounted television.
The placement of these brackets and the cabinet space allotted for a at-screen television are shown below.
The television enclosure is 54” Wide by 27” Tall. Please note
that diagonal screen measurements will not give the true
physical dimensions of the television because the diagonal
measurement does not take into account the television’s
housing. Therefore, the best measurement to use is the actual
height and width of your television (including the base if used).