Specifications

Page 24 of 76 SmartSource 2-Stage Water Source Heat Pumps Catalog 1114-1
Adjustable 55° to 95°F or +/- 3°F Sensors
Adjustable 55º to 95ºF +/- 3ºF or +/-1.5°C Sensor
The adjustable 55° to 95°F or +/- 3°F or +/-1.5°C sen-
sors can be used for 2-stage heating, 2-stage cooling, and
2-stage electric heat applications. Electric heat options
include boilerless, supplemental, and primary heat capabili-
ties. Unit status is provided through a ashing LED located
on the sensor while timed tenant override and fault reset are
provided through the override button. Changing the system
or fan mode is easily accomplished through the slider
switches.
Basic Sensor
The basic sensor provides simple
room temperature sensing for
2-stage heating, 2-stage cooling,
and 2-stage electric heat applica-
tions. Electric heat options include
boilerless, supplemental, and
primary heat capabilities. Unit
status is provided through a
ashing LED located on the sensor
while timed tenant override and
fault reset are provided through the
override button.
Digitally Adjustable Sensor with Temperature and
Humidity Display
Specically designed for Smart
Dehumidication or Waterside
Economizer applications, the
Digitally Adjustable sensor
provides the ultimate of
temperature and humidity
control and display, simple user
interface, alarm annunciation,
and alarm reset. The easy to
read LCD clearly identies the
system operating mode
including Smart Dehumidica-
tion (Dehum), occupied/unoccupied mode, fan operation,
unit status, timed override status, alarm annunciation, and
energy savings mode through a series of recognizable
icons. Tactile response buttons initiate adjustments for
temperature and humidity set points, system mode, fan
mode, occupancy, tenant override and fault reset functions.
The large numeric LCD will display space temperature (°F
or °C) and space humidity (%RH) along with the corre-
sponding setpoint conditions. The Digitally Adjustable
Sensor is required for BACnet or LonWorks applications.
However, it can also be installed as a standalone sensor
using factory default set points.
Adjustable Cool/Warm Sensor with Occupancy
Switch
The Adjustable Cool/Warm
Sensor with Occupancy Switch
can be used for 2-stage
heating, 2-stage cooling, and
2-stage electric heat applica-
tions. Unit status is provided
through a ashing LED located
on the thermostat while timed
tenant override and fault reset
are provided through the override button. Changing the
system mode, fan mode and occupancy is easily accom-
plished through the slider switches.
Accessories