User`s manual

ManualsBrandsCal Flame ManualsHeating SystemFPT-1100

START-UPCHECKLIST

(RemoveandStoreinJob File)

L PRELIMINARY INFORMATION

MODEL NO: .............................................................................................................................................................

SERIAL NO: ..............................................................................................................................................................

DATE: ........................................................................................................................................................................

TECHNICIAN: ...........................................................................................................................................................

JOB LOCATION: ...........................................................................................................................................................

II. PRE-START-UP (insert checkmark in box as each item is completed)

VERIFY THAT ALL PACKING MATERIALS HAVE BEEN REMOVED FROM UNIT

VERIFY THAT CONDENSATE CONNECTION IS INSTALLED PER INSTALLATION INSTRUCTIONS

CHECK ALL ELECTRICAL CONNECTIONS AND TERMINALS FOR TIGHTNESS

CHECK GAS PIPING FOR LEAKS

CHECK THAT INDOOR (EVAPORATOR) AIR FILTER IS CLEAN AND IN PEACE

VERIFY THAT UNIT INSTALLATION IS LEVEL

CHECK FAN WHEEL PROPELLER FOR LOCATION IN HOUSING ORIFICE AND SETSCREW TIGHTNESS

IIL START-UP

ELE( TRI(AL

SUPPLY VOLTAGE LI-L2

COMPRESSOR AMPS L1

]NDOOR (EVAPORATOR) FAN AMPS

L2-L3 L3-LI

L2 L3

TEMPERATURES

OUTDOOR (CONDENSER) AIR TEMPERATURE: DB

RETURN=AIR TEMPERATURE: DB WB

COOLING SUPPLY AIR: DB WB

GAS HEAT SUPPLY AIR:

PRESSURES

GAS INLET PRESSURE IN. WG

GAS MANIFOLD PRESSURE IN. WG

REFRIGERANT SUCTION PSIG

REFRIGERANT DISCHARGE PSIG

SUCTION LINE TEMP*

DISCHARGE LINE TEMPt

VERIFY REFRIGERANT CHARGE USING CHARGING TABLES

VERIFY THAT 3-PHASE SCROLL COMPRESSOR (48GS048 and 48GX030-060) IS ROTATING IN CORRECT

DIRECTION.

* Measured at s_mtion inlet to compressor