Use and Care Guide

10
Cal Flame Care and Maintenance Guide
LTR50001132, Rev. B
www. c a l  a m e b b q .c o m
Remove the burners2.
The burners can be
removed by taking out the
locking pins and carefully
lifting them up and away
from the valve orice. The
locking pins are located
under the grill toward the
back. They are used to
keep the burners in place
during shipping and are
not necessary to operate
your grill.
Clean the burners3.
Use a wire brush to clean
the outer surface of each
burner to remove food
residue and dirt. Clean any
clogged ports with a stiff
wire such as an opened
paper clip.
Make sure the ow channel is clear.
The ow channel is the narrow slot
on the bottom of the burner near the
anchor post.
Inspect each burner for damage,
such as cracks and holes. If any
damage is found, don’t use the grill
until you replace the burner.